Take a fresh look at your lifestyle.

Roof flashing – an important part of keeping your home watertight

97

What is roof flashing?

Roof flashing is a metal or plastic piece installed in the field of a roof that covers and protects a component or joint. Roof flashings are used to prevent water from leaking into the building through cracks or holes in the roof. They are also used to prevent water from leaking out of the building and into the walls, causing mould and mildew growth. They can be made from different materials like aluminium, steel, copper and plastic.

Common types of roofing flashings include chimney flashings, door flashing, step flashing and skylight flashing. Chimney flashings are designed to keep water away from chimneys and other vents on roofs. These are usually made of metal so they can withstand high temperatures. Door flashing prevents leaks around doors while they open outwards towards the exterior of your home. Step flashing protects steps against erosion due to weathering while allowing rainwater to drain away naturally without any problems occurring with your foundation or underlayment beneath your stairs. Skylight flashing helps prevent leaks around skylight windows on roofs so there is no damage done by water seeping through this area of your home’s exterior walls or roofing structure.

What are different types of roof flashing?

There are many different types of roof flashings used in Australian homes. The purpose of flashing is to seal the top of the roof from water and other elements. They are installed over chimneys, vents and pipes, as well as at the eaves of the house. The following are some of the most common types of flashings used in Australia:

1. Metal Flashing

The most common type of flashing used for chimney tops is metal flashing. It comes in different lengths and thicknesses and is made from aluminium or steel. It has a pre-formed lip on one side to help it bend easily around corners. Metal flashing is also used under chimneys to stop excessive rainwater from entering through gaps between bricks or stones and causing leaks inside homes.

2. Copper Flashing

Metal flashing isn’t always necessary for chimney tops because copper will also do the job just as well at keeping water out of your home. Copper can withstand heat better than other metals so it makes sense that it would be perfect for protecting your fireplace or wood stove from getting damaged by high temperatures during those cold winter months when you’re using them regularly.

Why is Roof Flashing Important?

Roof flashing is an important part of any roofing system because it prevents water from entering the building’s interior. Water damage can be costly to repair, so it’s important to prevent leaks from occurring in the first place. The following are some of the benefits of using roof flashings:

Preventing water from entering your home through roof valleys or other areas where water could enter your home’s interior.

Keeping rainwater from leaking into attic spaces or crawl spaces and causing damage to insulation, drywall, wood framing, electrical wiring and more.

Why should you get your roof’s flashing inspected regularly?

Now since you know the importance of roof flashing, let’s get into why roof flashing inspection is important.

The flashing around your roof is crucial to keeping water out of your home. If there are leaks in this area, you may have damage to your walls and ceilings. It’s important to have your flashing inspected regularly to make sure it’s in good condition and doing its job.

If you notice that your flashing isn’t working properly, it could be time for a replacement. Here are some signs that you need a new roof flashing:

  • Leaks – You may see water stains or other signs of water damage on your exterior walls if there’s a leak in your flashing.
  • Cracks – Cracks can develop over time due to wear and tear or extreme weather conditions.
  • Rusting – Rusting indicates that the metal isn’t as strong as it once was and needs to be replaced before it fails completely.

Roof flashing inspection process

Roof flashing inspection is the process of checking for any damage to the roof flashing and replacing it. The purpose of this is to ensure that water does not come into contact with your home’s inner structure. Roof flashing inspection should be done after every few years, depending on the condition of your property.

Roof flashing inspection includes checking:

  • The condition of all types of roofing materials such as shingles, tiles, sheet metal, etc.
  • The presence or absence of any cracks, missing pieces or holes in the roofing material.
  • The sealing mechanisms prevent water from entering through cracks or holes in the roofing material.

How will a roofing company help you with your roof flashing inspection and maintenance?

When you have a local roofing company come in to inspect your roof flashing, you can feel confident that they will be able to help you with any issues. Roof flashing is a system that helps to prevent water from getting into your home, which means that it is extremely important. If there are holes or leaks in the roof flashing, then you have a problem.

A roofing company can help you determine whether or not there are any problems with your roof flashing. They will also be able to tell you how long it will take for them to repair or replace any damaged areas.

If you want to make sure that the roof over your head is safe and secure, then it is important that you make sure everything is in good shape before winter comes around again. When winter arrives, cold winds and hail storms can cause damage if there are any cracks or holes in your roofing system.

If you notice any problems with your roofing system during the winter months, then give us a call today so we can come out and assess the situation yourself!

If you aren’t sure about inspecting your home’s roof flashing yourself, you can contact roof restoration wheelers hill experts.